High-Pole Escort
Coordinated through our pilot car network.
A high-pole pilot car runs ahead of tall loads with a calibrated height-pole that contacts overhead obstructions before the load does — overpasses, power lines, traffic signals, and signage. Magic Valley Piloting doesn’t run a high-pole rig directly, but we coordinate this work through trusted operators in our pilot car network — one call gets you the right rig and the right driver. Call (208) 924-3720.
What high-pole escort covers
Pole set 3″ above the load profile so any contact gives advance warning before the actual load reaches the obstruction.
High-pole vehicle runs ahead of the load throughout the entire route, not just at known low spots. Catches surprises — sagging utility lines, recent construction additions.
When the pole contacts something, immediate radio to the load driver, stop the move, verify actual clearance manually before proceeding.
Often runs alongside or alternating with a standard lead car. Lead handles traffic scouting; high-pole handles vertical clearance.
Pole can be raised or lowered between runs depending on load. Calibrated to the specific load profile for each job.
Many state oversize permits require high-pole escort above a specific load height — we know the thresholds and run the right setup.
When you need high-pole escort
- Any load over 14′ tall (state thresholds vary — check with the route permit)
- Loads where overhead utility line clearance is uncertain
- Routes with low signage gantries or older overpasses
- Super-tall industrial equipment moves
- Permitted height moves where the state mandates a high-pole car
What every run includes.
DOT-compliant amber strobes and beacon lights, visible front and rear.
“Oversize Load” / “Wide Load” banners and red flags per state requirements.
CB and handheld for constant communication with the load driver.
State pilot car certifications carried, permits reviewed, run docs in order.
Need
Let’s talk specifics.
Route, schedule, load profile — quote on the call.